Operating Instruction and Documentation
SPL 4000
- 22 -
• Check the hydraulic hoses for leakage.
• Check the condition of ropes. If torn wires are discovered, the complete rope set must be
changed.
• Check all welded joints for cracks on the automotive-lift.
If any cracks are found on the lift cease use immediately. Switch-off and secure the main
switch (lock) and call the service partner.
• Check the safety device of the lift.
• Check the rubber of the carrying arms and replace them if its necessary.
• Check all surfaces and repair if necessary.
• Damage to external surfaces, must be immediately repaired.
If theses repairs are not made immediately, permanent damage to the powder-coated
surface may result.
Repair and clean damaged areas with an abrasive paper (grain 120). After this is complete,
use a suitable paint (observe the RAL Number).
• Check the zinc surface and repair it with a suitable tool. Use abrasive paper (grain 280).
White rust can result from moisture laying in certain areas for long periods of time. Poor
aerating can also result in rust formation.
Rust may result from mechanical damage, wear, aggressive sediments (de-icing salt, liquids)
or insufficient cleaning.
Repair and clean these areas with abrasive paper (grain 280).
After this is complete, use a suitable paint (observe the RAL Number).
• The hydraulic oil has to be changed at least once a year. To change the oil, lower the lift into
its lowest position. Empty all tanks and refill with clean oil, approx. (see chapter 3.) per
hydraulic unit are needed.
Use an ATF-Suffix hydraulic-oil (OEST Company ) if the ambient temperature is under 5
degrees centigrade. After filling, the hydraulic oil must be between the upper and lower
markings of the oil level gauge.
Remove the old oil according to the appropriate regulations.
• Check the hydraulic tubes for leakage.
• Check the rolls and the equalisation ropes of the lift.
• Check the electrical parts.
• Check that all screws and bolts are correctly torque (turning moments, see the list)
Содержание SPL 4000
