JUMBO 7000 HFK SCISSOR
Nussbaum Automotive Solutions, LP | 1932 Jordache Court, Gastonia, NC 28052 | 704.864.2470 | Email:
7
•
The main electrical switch (when applicable) must be switched off and locked out/tagged out according to OSHA
Regulations before maintenance or repair work is performed on the Lift.
•
The operator must continue to observe the vehicle and Lift throughout the lifting or lowering operation.
•
Check the center of gravity of the vehicle if heavy parts, such as the engine are removed.
•
If heavy parts such as the engine must be removed, the center of gravity will change. Secure the vehicle before
removing parts to avoid the possibility of the vehicle becoming insecure.
•
Read all instructions
before operating lift.
•
Care must be taken as burns may occur from touching hot parts.
•
Do not operate the equipment with a damaged cord or if the equipment has been damaged
–
until it has been
examined by a qualified service person.
•
To reduce the risk of fire, do not operate equipment near open containers of flammable liquids (gasoline).
•
Adequate ventilation should be provided when working on operating internal combustion engines.
•
Keep hair, loose clothing, fingers, and all parts of body away from moving parts.
•
Use only as described in this manual. Use only manufacturer’s recommended attachments.
•
ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses, they are not safety
glasses.
SAVE THESE INSTRUCTIONS
2.
SAFETY DEVICES
Nussbaum has designed several safety features into each Lift to ensure safe and efficient operations under a variety of
conditions. Warranties will be voided, and dangerous working conditions exist if any of the listed devices are altered
or disabled.
Pressure relief valve
Safety device to prevent over pressuring of the hydraulic system.
Two independent master-slave systems
Safety device that protects against unintentional lowering.
Safety Ratchets
Safety device against unintentional lowering.
Hydraulic Flow Restrictors
Safety device to prevent excessive lowering speed.
Check Valve
Secures the vehicle against unauthorized lowering.
Hold-to-run controls
Safety device that protects against unsupervised operation
