Nussbaum COMBI LIFT 4.80 H, Руководство по эксплуатации и книга учета инспекций

Страница: 39 / 63

Operating Manual and Inspection Book
COMBI LIFT 4.80 H / HYMAX II 8000
39 Version 3.0
vated and the lift switches off. In this case, move the lift upwards
by pushing the “Bridge”
(16) and the o “LIFT” (12) buttons on the operating panel until the obstacle can be re-
moved or the cable is tensioned again.
Afterwards the lift is in a normal work condition and can continue to be operated as de-
scribed in the operating manual.
6.2 Emergency lowering
An emergency lowering is an engagement into the system controls and may
only be done by experienced specialists.
The emergency lowering must be done in the following described sequence,
otherwise it can lead to damage and hazard to life and limb.
Any kind of external leakage is not permitted and must immediately taken care
of. This is absolutely necessary especially before an emergency lowering.
i
If there is a power failure an emergency lowering can only be done if the safety ratchets
are not engaged. For this reason wait until the power failure is over. If there is a defective
valve, a latched in lift can be slightly lifted by pushing the
↑
“LIFT” button (b) so the catch-
es (j) can be manually retracted.
• People may not stand in the hazardous area around the lift.
• The safety ratchets must be capable of being manually retracted in order to fas-
ten them using a suitable object (e.g. wire) against latching in.
In order to execute the emergency lowering the following tools are required:
• 1 x screw-on cap with Allen screw (f)
• 2 x screw-on cap with wing bolt (g)
• 1 x 3 Allen key (h)
• 4 x cable ties / wire (i)
f) screw-on cap with Allen screw g) screw-on cap with wing bolt
g
f