Nussbaum 4.50H, Руководство по эксплуатации

Страница: 36 / 47

Operating instructions and documentation
4.50H/ 4.50H plus
- 36 -
9.3 Adjusting the rails
The standard distance between the rails is 950 mm. It is possible to adjust the rails +/- 100 mm
(see datasheet). Lower the lift in the ratchets until there is no tractive power on the ropes.
• Lower the main lift in the ratchet.
• Remove the ramp and the roll-off safety device from the adjustable rail.
• Remove both covers of the crossbeam.
• Remove the screws and if necessary position supports under the rail.
• Adjust the rail.
• Tighten the screw.
• Mount the cover.
• Mount the ramp and the roll-off safety device.
• Raise the lift out of the ratchets.
9.4 Initiation
Before the initiation a security check must be carried out. Therefore use the form: First
security check.
If the lift is installed by a competent person, he or she has to perform the security check. If the
operator installs the lift by him or herself, he or she must instruct a competent person to perform
the security check.
The competent confirms the faultless function of the lift in the installation record and the form for
the security check and authorises the use of the lift.
Please send the completed installation record to the manufacturer after installation.