a.
The screen will display the patient’s ID, sex and measured volume record. The images
from past scans will be displayed on the right under the patient ID. There will be 6 images
displayed per screen.
b.
For example, if “This is 01/09” is displayed, “01” means this is one of nine total records
that have been stored
2.
Press the
key to print the current record being displayed
3.
Press the
▲
key or touch
to display the previous record
4.
Press the
▼
key or touch
to display next record
5.
Press the
◄
key or touch
to display the next 6 images
6.
Press the
►
key or touch
to return the
Ready
screen
7.
Press the
key or touch
to delete the current record
7.9.1 Deleting Stored Records
1.
Press the
▲
/
▼
keys or touch Format
2.
Press the
key or touch NO
3.
Press the
▲
/
▼
keys or touch YES/NO again and toggle between YES/NO.
4.
When display reads “YES”, press the
key or touch Format again to delete all measured
records
7.9.2 Location Presentation
When taking a measurement, the nurse should put the
scan key of the probe face to the head of
patient.
After scan and measurement, if the picture of the bladder is located in the center of the
coordinate, the scanned result is ok; if the picture of bladder is not in the center of the coordinate
(see Figure7-19 through 7-26), y o u w i l l need to rescan and adjust the measurement according to
the operating instructions
Page
32
Содержание PBSV4.1
Страница 1: ...USER MANUAL Bladder Scanner...
Страница 14: ...Control Panel 4 Control Panel Figure 4 1 Control Panel Page 14...
Страница 33: ...Page 33...
