NURIS LN 350 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 48

NURIS LN 350 Скачать руководство пользователя страница 22

08/2022 Rev. 1.1

16

This machine is manufactured in accordance with TS-EN 60974-1.
The service lifetime is 10 (ten) years.

6. TRANSPORTATION



You can transport the device by lifting it from the overhead lifting
eyes.



All electrical connections must be removed during transportation.



Do not the carry machine upside-down or sideways. Move the machine
with the top up.



Do not stack the machine. It is not suitable for stacking.



Protect against impacts and weather conditions during transportation.

7. MANUFACTURER COMPANY

NURİŞ TEKNOLOJİ ve MAKİNE SAN. TİC. A.Ş.
Ankara Organize Sanayi Bölgesi Ahi Evran OSB Mah. Babürşah  Cad. No: 2 06935
Sincan-ANKARA TÜRKİYE

Phone: +90 (312) 267 58 60 Web: www.nuris.com.tr

8. SERVICE

Please refer to www.nuris.com.tr  for the most update list of local
representatives and authorized  technical  service lists. If there  is no accessible
technical  service in the territory,  the default  technical  service contact  info is
given below:

NURİŞ TEKNOLOJİ ve MAKİNE SAN. TİC. A.Ş.

Ankara Organize Sanayii Bölgesi Ahi Evran OSB Mah. Babürşah Cad. No: 2
06935 Sincan-ANKARA TÜRKİYE
Phone: +90 (312) 267 58 60 Web: www.nuris.com.tr

«
...
20
21
22
23
24
...
»

Содержание LN 350

















































Отзывы:

Нет отзывов