NURIS LN 350, Руководство по эксплуатации, Страница: 11 / 48

08/2022 Rev. 1.1
5
3.STORAGE AND INSTALLATION
3.1. S TORAGE AND OPERATION ENVIRONM ENT

The machine should be stored in a closed and dry environment between
-30
o
C and +55
o
C.

It should be kept upright and nothing should be put on it.

Operating temperature must be between -25
o
C and +40
o
C and it should
be operated in a dry environment.

Make sure that the machine can breathe easily while working.

Dirt and dust in the environment should be at minimum.
3.2. TRANS PORTATION

Always use the handles when moving the machine.

Never pull on cables, torch or hoses.

Before moving make sure that the machine is turned off and
disconnected from the grid.

Before transporting, remove all interconnections.

Gas cylinders and small parts must be transported separately from the
machine.

Chains and/or ropes to be used during transportation should be of equal
length, equal load distribution should be ensured and the machine
should be lifted in a balanced way.

The relevant regulations of the country of use, occupational safety and
accident prevention rules should be taken into account.

During transport, nobody should be in the dangerous area under the
machine.
3.3. INS TALLATION

Put the welding machine in a place that you can easily access during
work.

The welding machine should not be close enough to adversely affect
the operation of the operator.

The machine must be placed in a way it can easily breathe from the air
inlets.

Make sure that the environment is not wet and too humid.