NURIS LN 350, Руководство по эксплуатации, Страница: 13 / 48

08/2022 Rev. 1.1
7
To automatically adjust the synergistic program, use the adjustment button
(Figure 1.1d) to enter the section below.
Here, the user should select;
●The material to be welded,
●Wire type,
●Wire diameter,
●Protective gas,
●Pulse sections, respectively.
When the program number is seen on the screen after the selections are made,
the determined program can be saved by pressing the setting button in Figure
1 again, and it can be canceled by pressing the right or left adjustment button.
Figure 4. Settings Menu
Figure 5. Settings Menu