64
ENGLISH
Technician:
• In this steam temperature setting is possible
to plan the offset value, from -15°C to
+15°C, to obtain the correct temperature
value.
• By pressing the key of the first group,
is showed the offset value setted:
the way to show is the same of the way to
show the final steam temperature.
• The keys of the first group show a value
from 0 to 15°C, the
key of the second
group show the offset sign:
• it is switched on the value is POSITIVE, if
the key is switched off is NEGATIVE.
• By releasing the key of the first group,
you memorize the value and came back to
the steam temperature setting.
Manually:
• After entering in the program of the first
group, press the
keys of the first
group, keys of the first and second group
show the temperature starting from a mini-
mum value of 50°C.
• At every key has an value:
STEAM NOZZLE WITH TEMPERATURE
PROBE (OPTIONAL)
• Make sure the temperature probe is con-
nected to the control unit.
• The temperature value can be planned by
sampling or manually depending by the
types of memorization planned in the param-
eter setting section and value goes from a
minimum of 50°C to a maximum of 95°C.
• By pressing the
key of the second
group is possible to chose if you wont set the
steam temperature value manually or by
sampling.
• When you enter in this part of the menu, the
key of the second group is switched
on.
• By pressing the key
of the second
group, it is possible to change the way in
which settings are stored to memory.
• Press the continuous delivery key
for
the 2nd unit to memorise the temperature
value input mode.
Sampling:
• After entering in the program of the first
group, put a jag with milk under the steam
wand and press the
key, the delivery
of steam will start.
• By pressing again the
key, or if it is
reached the maximum temperature, the control
board memorizes the temperature reached.
Keys
1° GROUP
2° GROUP
1 °C
10 °C
2 °C
20 °C
4 °C
-
8 °C
-
Keys
1° GROUP
2° GROUP
1 °C
+ o - °C
2 °C
-
4 °C
-
8 °C
-
• Sum together the value associated to the
relevant lit key to a minimum value of 50°C
to obtain the temperature setting.
• If the key is lit, it is necessary to add the
reference value, while it is not required if the
key is not lit.
• By pressing again the
key the value
is planned and the machine came back to
the general programming.
This way of setting doesn't use the delivery
of steam.
• To escape from the program and save the
setting, press the continuos
key of the
first group.
Содержание Aurelia
