Num'axes PIE 1013, Инструкция по эксплуатации

Страница: 63 / 168

Indice A 63/168
•
The hours 1
st
digit is blinking. Press the UP [
▲
] or DOWN
[
▼
]
button to increase or decrease the value then press
[M] once to confirm and move to the next digit setting.
•
The hours 2
nd
digit is blinking. Press the UP [
▲
] or DOWN
[
▼
]
button to increase or decrease the value then press
[M] once to confirm and move to the next digit setting.
•
The minutes 1
st
digit is blinking. Press the UP [
▲
] or
DOWN [
▼
]
button to increase or decrease the value then
press [M] once to confirm and move to the last digit
setting.
•
The minutes 2
nd
digit is blinking. Press the UP [
▲
] or
DOWN [
▼
]
button to increase or decrease the value than
press [M] once to confirm the Start Time setting and
move to the End Time setting.
•
The display will show T + E 88:88
(E = End, 88:88 = time in HH:MM).
•
You can adjust the end time from
00:00 to 23:59 by pressing the
[
▲
] ,
[
▼
]
and [M] buttons same as Start
Time setting.
•
Press [M] once to save the “End Time” setting and move
to the Time Out setting. The Time Out in Time Lapse
mode can be programmed from 5 seconds (00:05) to
10 minutes (10:00) or be set OFF. If the Time Out setting
is OFF, the camera will not take images.