Num'axes PIE 1013, Инструкция по эксплуатации

Страница: 59 / 168

Indice A 59/168
Setting the Burst Shoot in PIR mode
Your camera can be programmed to shoot 1 to 10 pictures per
trigger.
•
Slide the switch to the TEST position from OFF , the status
display will show the camera current status.
•
Press the [M] button once to enter the programming
mode.
•
The word “ PIR” will be blinking, press [M] to confirm the
camera’s operation is PIR detection.
•
Press the UP [
▲
] or DOWN [
▼
]
button until the words
“ CAM” and “burSt” are blinking.
•
Press [M] once to enter the burst shoot setting.
•
Press the UP [
▲
] or DOWN [
▼
]
button to select the
desired burst mode setting (from 1P to 10P).
•
Press [M] once to save your selection. The words “CAM”
and “T-O” (Time Out) will be blinking. Press the [M]
button once to enter the time out setting or press and
hold the
[M] button for 2 seconds to exit.