Num'axes PIE 1013, Инструкция по эксплуатации

Страница: 61 / 168

Indice A 61/168
•
After pressing [M] to confirm the Burst Shoot or Video
Length setting, “CAM” and “T-O” or “VIDEO” and “T-O”
will be blinking on the status display.
•
Press [M] to enter the Time Out setting.
•
The minutes 1
st
digit is blinking. Press the UP [
▲
] or
DOWN [
▼ ]
button to increase or decrease the value then
press [M] once to confirm and move to the next digit
setting.
•
The minutes 2
nd
digit is blinking. Press the UP [
▲
] or
DOWN [
▼
]
button to increase or decrease the value then
press [M] once to confirm and move to the next digit
setting.
•
The seconds 1
st
digit is blinking. Press the UP [
▲
] or
DOWN [
▼
]
button to increase or decrease the value then
press [M] once to confirm and move to the last digit
setting.
•
The seconds 2
nd
digit is blinking. Press the UP [
▲
] or
DOWN [
▼
]
button to increase or decrease the value then
press [M] once to confirm the Time Out setting.
•
You’ll then see the word “PIR” blinking on the LCD screen.
Press the DOWN [
▼ ]
button twice to enter the SET menu
or press and hold the [M] button for 2 seconds to exit.
Setting the Time Lapse Mode (TLS)
In Time Lapse mode, the camera will take photos automatically
at your choice of intervals during one block of time you set up.
The Video mode is not available in Time Lapse mode.