07
06
ADJUSTING THE EXHAUST
The adjustable exhaust on the cap of the tool allows
users to direct the exhaust according to operator
preference. To adjust the direction, turn the exhaust
cap in the desired direction.
The tool may fire when it is first
connected to the air resource. Always
connect the tool to the air source before
loading fasteners to prevent injury from
unintended cycling. Always make sure
the tool's magazine is empty at the
beginning of each work session, before
connecting to an air source.
WARNING:
!
Connect the tool to the air source.
Push down on the latch button(B). Pull back on
the magazine cover(C).
Load a clip of fasteners with the crowns
straddling the magazine rail(D).
Push the magazine cover(C) forward until latch
button pops up.
OPERATION
⒈
⒉
⒊
⒋
LOADING FASTENERS
FEATURES
Latch button(B)
●
●
●
●
360
°
ADJUSTABLE EXHAUST
COMFORT-GRIP HANDLE
ERGONOMICALLY ENGINEERED BODY
Allows user to direct air away from face.
For increased comfort and control.
Rugged and Comfortable debris free, extending
tool life.
NON-MARRING SAFETY CONTACT
Eliminates damage to working surface.
The warnings and precautions discussed
above cannot cover all possible
conditions and situations that may occur.
It must be understood by the user that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the user.
WARNING:
!
UNPACKING
This tool has been shipped completely
assembled.
Carefully remove the tool and any
accessories from the box.
Inspect the tool carefully to make sure no
breakage or damage occurred during
shipping.
Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.
If any parts are damaged or missing, please
call 1-888-669-5672.
●
●
●
●
●
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
WARNING:
!
Do not attempt to modify this tool or
create accessories not recommended for
use with this tool. Any such alteration or
modification is misuse and could result
in hazardous condition leading to
possible serious personal injury.
WARNING:
!
Compatible with All Generic 18 Gauge Staples.
FEATURES
SPECIFICATIONS
REQUIRES:
AIR INLET:
MAGAZINE CAPACITY:
WEIGHT:
MAXIMUM PRESSURE:
PRESSURE RANGE:
4.31 SCFM with 100
fasteners per minute @ 90 psi
1/4 inch NPT
100 fasteners, 18 gauge
2.46 lbs
100 psi
60 psi 100 psi
–
PIN SIZE RANGE:
1/2 inch to 1-1/4 inch
MODEL: SST9032
MODEL: SST9032
Magazine rail(D)
Magazine cover(C)
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
.
.
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
.
.
Keep the tool pointed away from yourself
and others when loading fasteners.
Failure to do so could result in possible
serious personal injury.
WARNING:
!
Never load fasteners with the workpiece
contact or trigger activated. Doing so
could result in possible serious personal
injury.
WARNING:
!
Use only those fasteners recommended
for use with this tool. Fasteners not
identified for use with this tool by the tool
manufacturer are able to result in a risk of
injury to persons or tool damage when
used in this tool.
WARNING:
!
