Numatic TTV-5565/200T, Инструкция оператора, Страница: 10 / 32

233887 / 06/11 (A05)
10
Machine Set Up
Fitting the brushes
Featuring the new OBS (Octagonal Brush System);
The brushes simply push-fit up onto the chucks making fitting and removal a simple process.
Ensure the Brush deck is set to the appropriate width for the brushes being used.(fig 11a/11b).
Slide the brush under the brush deck (fig 12).
Fit the brushes onto the OBS drive chuck (fig.13)
Safety gloves are recommended for the changing of used brushes.
Note:
Check the deck width setting is correct with the selected brushes before use.
Fig.12
Fig.13
Setting the width adjustment
Adjustment of the Brush deck must take place with the deck in the raised position.
Lift the Deck locking knob located at the front of the machine. (see fig.11), then pull the side pod at the handle position
to expand or close to contract the deck to the desired width - 650mm (see Fig.11a) or 550mm (see Fig 11b)
650mm 550mm
Fig.11 Fig.11a Fig.11b
Note: Use 2x 330mm Brush size for
650mm setting.
Note: Use 2x 280mm Brush size for
550mm setting.
2x 330mm Brush for 650 mm setting.
2x 280mm Brush for 550 mm setting.
Note: Remove the brushes before adjusting width!