Numatic TTB 1840G, Оригинальное руководство пользователя

Страница: 17 / 40

17
T 01460 68600
Regular Maintenance
Remove the two hoses to disconnect the separator from the
machine (Fig.1 & 2).
Remove fixing band holding separator in place (Fig.3).
Lift off the separator. The separator has a sealing-rubber which
should be examined at every clean-down (Fig.4).
Rinse using clean water.
ALWAYS ENSURE THAT THE BATTERY IS DISCONNECTED
PRIOR TO ANY MAINTENANCE OPERATION
! !
After use, empty waste-water tank using
emptying hose and flush-out with clean
water. (fig.A).
The clean-water tank can be drained via
the yellow cap fitted to the left hand side
of the machine. There is a sealing bung
beneath the yellow cap (ensure the sealing
bung is clean) The cap should only be done
up by hand. (fig.B).
Emptying Top Tank
Separator
Emptying Bottom Tank
A
1
2
3
4
A B
B
Remove the two filters clipped into the separator and flush with clean water (Fig.A & B).
Replace by fitting the rear of the filter first then clipping the front to lock in place.