34
Brush overload.
'>
overloaded (Fig 28)
Releasing the handle triggers will allow the machine to stop
and reset.
If the brush motor keeps overloading consider using a different type of brush.
Or move the transit wheels to obtain different brush pressures,
Heavy brush load decreases the available battery run time.
Setting the cleaning controls
Hi / Lo speed can only be toggled when the machine is in STAND-BY MODE.
Water ON / OFF can only be toggled when in ACTIVE MODE.
Brush / Vac Switch
can be cycled in both STAND-BY and ACTIVE MODE
STAND-BY
Stage 1.
Brush and Vac
Stage 2.
Brush only
Stage 3.
Vac only
ACTIVE
Stage 1.
Brush and Vac
Stage
2. Brush
When the triggers are released the brush motor and the cleaning solution pump will switch off, the vacuum motor will
*~ $ +
The panel if unused will automatically enter SLEEP MODE after 60 seconds.
Fig 27
Fig 28
To activate the machine from SLEEP MODE press either trigger once.
