22
6
Fit the Brush / Pad (Fig 9).
Push in the deck
locking pin (Fig 10)
and rotate the
brush deck into
the operating
position (Fig 11).
Fig 9
7
Turn on the clean water tap (Fig 12).
8
To start: hold either trigger and press the yellow start button once
(Fig 13).
Brush, vacuum and water settings can be controlled by the control panel
(See Page 34).
Fill the clean-water to a Max of 40 litres (see page 28)
For operation and cleaning controls (see page 34)
Notes
........................................................................................................
........................................................................................................
........................................................................................................
........................................................................................................
........................................................................................................
........................................................................................................
........................................................................................................
Fig 12
Fig 13
Fig 10
Fig 11
Fig
On
Off
butto
