Numatic ET 4045, Инструкция пользователя, Страница: 6 / 20

6
• Only use brushes provided with the appliance or those specified in the instruction manual.
• The use of other brushes may impair safety.
• A full range of brushes and accessories are available for this product.
• Only use brushes or pads which are suitable for the correct operation of the machine for the specific task
being performed.
• It is essential that this equipment is correctly assembled and operated in accordance with current safety
regulations.
• When using the equipment always ensure that all necessary precautions are taken to guarantee the safety of the
operator and any other persons who may be affected.
• Wear nonslip footwear when scrubbing. Use a respiratory mask in dusty environments.
• The machine, while charging, must be positioned so that the mains plug is easily accessible.
• When cleaning, servicing or maintaining the machine, replacing parts or converting to another function the power source
shall be switched off.
• Mains operated machines shall be disconnected by removing the power plug, and battery operated machines shall be
disconnected by switching off the isolating key.
• Machines left unattended shall be secured against unintentional movement.
• When detergents or other liquids are used, read the manufacturer’s instructions.
• Do not allow the supply cord to come into contact with the rotating brushes.
• Operators shall be adequately instructed as to the correct use of the machine.
WARNING
Machine Set Up
PLEASE READ BEFORE COMMENCING ANY OPERATION
AFTER THE REMOVAL OF ALL THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS
! !
Tilting the handle
Using the handle position lever
(Fig.1).
Move the handle into the upright
position (Fig.2).
Fit the top tank to the machine (Fig.3).
Fit both vacuum and floor-tool hose to
the separator (Fig.4).
Fitting top tank
1 2
3 4