Nugsmasher ProTouch страница 3 Скачать руководство пользователя

Страница: 3 / 16

Version 1.0

NS102521

introduction

Thank you for the purchase of your NugSmasher® ProTouch. We have

designed this unit for the purpose of effortless rosin extraction with

industry leading 7”x 10” plates and integrated touch screen allowing

for the ultimate control and pressure application. When setting up your

unit, please ensure your stand is suitable for the weight of the machine.

Also note, that the unit gets hot and the high temperature hydraulic heat

plates are capable of bodily injury if not used in a safe manner.

(Please

do not attempt to open your unit casing as this will void your

factory warranty.)

While our products are sturdy and built to last, they are also heavy and

shippers can be rough during handling. If there are any problems from

shipping and your item does not deliver safely please contact us direct so

we can resolve the matter immediately.

As always, please feel free to call us at any point with any questions or

concerns at

(

951) 272-9800

NugSmasher®.com/contact

Содержание ProTouch
















Результаты поиска

Содержание ProTouch

Отзывы:

Похожие инструкции для ProTouch

Бренды по названию

Популярные бренды

Nugsmasher ProTouch, Руководство пользователя

Результаты поиска

Содержание ProTouch

Отзывы:

Похожие инструкции для ProTouch

Бренды по названию

Популярные бренды