NuDAQ PCI-8554, Руководство пользователя

Страница: 18 / 62

10
•
Installation
2.4 Default Jumper Setting
To operate the PCI-8554 correctly, users should understand the
structure of PCI-8554 and details of the possible configurations. The
block diagram of the PCI-8554 is shown in chapter 1. It contains the
clock system, counters confederation, interrupt system and PCI
controller. The following sections teach you the jumper setting and the
default setting listed in Table 2.1.
Items Default Configuration Setting by:
ECLK1 Debounce function JP1
ECLK2 Debounce function JP2
ECLK3 Debounce function JP3
ECLK4 Debounce function JP4
ECLK5 Debounce function JP5
ECLK6 Debounce function JP6
ECLK7 Debounce function JP7
ECLK8 Debounce function JP8
ECLK9 Debounce function JP9
ECLK10 Debounce function JP10
E_INT Debounce function JP11
Table 2.1 Default Configuration of PCI-8554
There are eleven jumpers on PCI-8554, these jumpers are used to
select debounce function. You can change PCI-8554's default
configuration by setting jumpers on the card for your own
applications. The card's jumpers are preset at the factory.
Before changing the default configuration, users must fully
understand the operation of the debounce function. The setting and
the basic operation theorem are not discussed in this chapter. It is
recommended to refer chapter 2.12 for details of the operation
theorem and to refer chapter 4 for application notes.
2.5 PCI-8554 Installation Outline
Hardware configuration
The PCI cards (or CompactPCI cards) are equipped with plug and play
PCI controller, it can requests base addresses and interrupt
according to PCI standard. The system BIOS will install the system