MOUNTING WATCH ON BIKE HANDLEBAR
Attach “C” Tube on handlebar, then mount the watch onto “C” Tube and tighten tit securely.
11
FREQUENTLY ASKED QUESTIONS
Please check that the transmitter electrodes are clean of debris.
Do not operate your heart rate monitor near highly electromagnetic fields, such as TV sets, cell phones,
computers, other watch units or other electronic devices that may cause signal interference.
Check the strap unit for a tight fit across the chest area. Loose fit may cause poor signal transfer and
detection.
Keep your transmitter and watch unit within the maximum distance range of 80cm(2 1/2 feet) for strong
signal transfer.
Avoid being near another heart rate transmitter within the maximum distance range of 80cm you’re your
watch unit. The second transmitter may cause inaccurate readings on your watch unit.
If at any time you experience irregular readings and or feel uncomfortable, consult a doctor to determine
your heart condition.
If the unit does not start up or stops during operation please recheck the battery installation and if the
battery needs replacement. (Note: Check the contact plate in the battery case is not beat or damaged.)
Sometimes when irregular data appears,execute "RESET" and try again to get the signal.
GUARANTEE
The following is not covered in the warranty:
▪
Battery
▪
Misuse and abuse to the system
▪
Improper maintenance
▪
Cracked or broken casings
▪
Plastic, rubber or fabric strap damage
DISCLAIMER
The specifications and descriptions in this user manual are subject to change without notice.
Model: HM8033
www.nu-beca.com