nubeca BA2115, Инструкция по эксплуатации

Страница: 16 / 16

Warranty Information
Unit subjected to misuse, abuse, and neglect of these manual
contents, non-instructional purposes;unauthorized repair or
modifications will be excluded from this warranty. This guarantee
specifically excludes expendables and consumables, for example
batteries.All warranty claims must be directed to the distributor
responsible for the sale of the device. The content of this warranty is
subject to change without further notice.
WARNING: No modification of this equipment is allowed.
For repair under this warranty.Our authorized service agent must be
advised of the fault within the period of the warranty.This warranty
covers parts and labor only under normal operations.A transportation
fee or freight fee that may be incurred will be the owner’s
responsibility.Any defect resulting from natural causes,e.g.,flood,
hurricane etc., is not within this guarantee.
The unit, excluding the unit cuff, is guaranteed to be free of defects in
workmanship and materials for a period of two years from the date
listed on the purchase record, when used in accordance with the
instructions provided with the unit.The unit cuff is warranted to be free
from defects in materials and workmanship appearing within one
year from the date listed on the purchase record when the unit is
used in accordance with the instructions provided with the unit.
This guarantee does not cover damage incurred by use of the unit
not in accordance with the instructions, accidental damage, or being
tampered with or serviced by unauthorized service agents.
29 28
EMC Table
Recommended separation distances between
portable and mobile RF communications equipment and the Digital Blood Pressure Monitor.
output power
of transmitter
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer.
Separation distance
(m)
according to frequency of transmitter
Pressure Monitor is intended for use in an electromagnetic environment in which radiated
RF disturbances are controlled. The customer or the user of the Digital Blood Pressure
Monitor can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and the Digital
Blood Pressure Monitor as recommended below, according to the maximum output power
of the communications equipment.
80 MHz to 800 MHz
0.01
0.1
1
10
100
0.117 0.233
0.369 0.738
1.167 2.333
3.689 7.379
11.667 23.333
800 MHz to 2.5GHz
NOTE l At 80 MHz and 800 MHz. the separation distance for the higher frequency range
applies.
NOTE 2 These guidelines may not apply in all situations .Electromagnentic propagation is
affected by absorption and reflection from structures, objects and people.