NuAire NU-5500, Руководство по эксплуатации и обслуживанию

Страница: 27 / 54

OM0133 26
8.8.1.2 Option Configuration Parameters
1) - CO
2
System Enable ( on /off)
2) - CO
2
Tank 2 Enable (on/ off )
3) - CO
2
Auto Switch Back (on/ off )
4) - Closed Door CO
2
Zero/Span Calibration (on/ off )
5) - Audible Alarm Return Enable ( on /off)
6) - Password Protection (on/ off )
7) - Auto Zero ( on /off)
8) - CO
2
Inject Delay Time (seconds/ 60 )
9) - Door Delay Time (seconds/ 40 )
10) - Air Inject Time (seconds/ 30 )
11) - Air Inject Cycle (minutes/ 10 )
12) - Print Frequency Time (minutes/ 0 )
13) - Temperature Time Out (minutes/ 240 )
14) - CO
2
Time Out (minutes /30 )
15) - Temperature Recovery Delay Time (seconds/ 60 )
16) - Temp. Sensor Differential (

C/ 4.0 )
17) - Temp. Max. Above Setpoint (

C/ 1.0 )
18) - CO
2
Max. Above Setpoint (%/ 1.0 )
(Note: Default values are in bold)
Once you have made your menu selection, you will remain within that menu selection until you exit the
diagnostic mode. If another menu selection is desired, you must re-enter the diagnostic mode via the
hidden key.
To exit the function parameters, press the hidden key (flag on NuAire logo).
1 - CO
2
System Enable
This function will enable or disable the CO
2
system. The value display
will show "on" or "off" corresponding to the current condition. In run
mode, the CO
2
percent display will indicate either the CO
2
percent when
the system is on or nothing when the system is off.
2 - CO
2
Tank 2 Enable (Optional)
This function will enable or disable the optional CO
2
tank 2 system.
The value display will show "on" or "off" corresponding to the current
condition.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com