NuAire B815H/ER/AT-L, Инструкция по установке, эксплуатации и обслуживанию

Страница: 3 / 60

05. 11. 20. Leaflet Number 671829
BOXER BPS ECOSMART ADAPT (TREND) CONTROL (AT)
3
The EMC Directive
2014/30/EU
The Low Voltage
Directive 2014/35/EU
XBOXER BPS HORIZONTAL MODELS
The information contained in this document provides details of installation,
operation and maintenance for installers and users of the BPS packaged
AHU units with heat recovery.
BOXER PACKAGED SOLUTION supply and extract unit range. Manufactured
from Aluzinc corrosion resistant steel, with 50mm double skinned panels and
anodized aluminium frame of a totally thermally-broken design, complying with
the following specification in accordance with BS EN 1886: Mechanical strength,
D1; Leakage class, L1; Thermal transmittance, T2; Thermal bridging, TB1.
BPS range has high efficiency centrifugal fans with EC motors. High efficiency
thermal wheel or plate heat exchanger, Supply G4 pre-filter and F7 main filters
as standard with M5 filtration of the extract air. BPS range includes optional
heating (LPHW or Electric) and cooling (Chilled water, DX or Reverse Cycle). The
Reverse Cycle coil is supplied as standard with Mitsubishi Mr Slim Condenser(s)
and inbuilt PAC Control. Note: control wiring and piping by others, thermistor
wiring (included). Installation must be carried out by F-Gas approved installer.
A range of ancillaries include – attenuators, weather terminals, recirculation &
frost modules.
BPS range is complimented by Ecosmart Control Platform which includes Basic,
Classic, Connect & Adapt as standard with a 5 year warranty.
General information regarding performance and specification for the equipment
can be obtained from our technical literature, and/or project specific documen-
tation.
Figure 1: Horizontal Plate Heat Exchanger unit.
CODE DESCRIPTION:
B 8 15 H / L R / AS - L
| | | | | | | |
1 2 3 4 5 6 7 8
1. BOXER Package Solution Range
2. ERP year:
8 = 2018
3. Unit Size: 05, 10, 15 and 20
4. Heat
Exchanger:
H = Horizonal Plate
5. Heater: L = LPHW
E = Electric
N = No Heating
6. Cooling: R = Reverse Cycle**
X = DX*
C = Chilled Water
N = No Cooling
7. Control type: AS = Ecosmart Adapt (Siemens)
CO = Ecosmart Connect
ES = Ecosmart Classic
BC = Basic control
8. Handing: L = Left, R = Right
*Condenser Unit and control by others.
**Ecosmart Connect & Adapt models only.
1.0 UNIT INTRODUCTION
SUPPLY & EXTRACT VENTILATION UNIT
INSTALLATION, OPERATING & MAINTENANCE
INSTRUCTIONS