NTT docomo Optimus L-05E, Инструкция по эксплуатации

Страница: 197 / 314

d
Hold mark over a reader to
communicate
Note
• You can read/write data with reader
without activating Osaifu-Keitai compatible
application.
• It is available even when you turn off
the power of this terminal, but it is not
available if the battery pack is removed.
Even when the battery pack is attached,
it may become unavailable if you have not
turned on this terminal for a long period of
time or the battery level is low.
Using "かざしてリンク対応サービ
ス (Kazashite-Link services)"
To use かざしてリンク (Kazashite-Link)
compatible services, application may be
needed. With "C Tag/Barcorde reader"
application (P101), use by holding the
mark over IC chip built-in device, smart poster,
etc.
Notes when holding over reader,
IC chip built-in device, etc.
Keep in mind the following when holding the
terminal over a compatible device.
• Do not strike the terminal against the reader.
• Hold the
mark parallel to the center of
reader.
• Bring the mark close to the device slowly.
• If the mark cannot be scanned even with
it held in front of the center of the scanner,
slightly lift up this terminal, or move it
backwards/forwards or to the left/right.
• When there is a metal object between
the mark and the device, reading may
fail. Note that putting this terminal into a
case or covering this terminal may affect
communication performance.
195
Application