NTT docomo FOMA D703i, Руководство пользователя

Страница: 43 / 440

41 Before Using D703i
Setting the date and time
Date and Time Setting
The time setting can be performed in 2 ways: obtaining the time information from the DoCoMo network
to automatically adjust the time setting of FOMA terminal, or manually entering the current time to the
terminal.
1
m8611
2
Select each item to set
z
Press
p
･
The entered number can also be increased or decreased with
%
. You can also reenter the number after
highlighting it with
&
.
The automatic time correction takes place when the UIM is inserted and you turn the power on in a location
where radio waves reach.
･
The automatic time correction sometimes causes a time error of several seconds. In addition, it may fail to
correct the time depending on the radio wave condition.
･
If the time information is received while i- α ppli is running, the time may not be corrected depending on the i- α ppli.
･
Even if
Auto time adjust
is set to
ON
, the time may not be corrected for a while. To enable the automatic time
correction, turn the power off and then on.
･
When no UIM is inserted or FOMA terminal is out of the service area, the automatic time correction is not
performed even if you turn the power off and then on.
INFORMATION
●
You cannot use the following functions when the date and time are not set:
･
Auto Power ON/OFF
･
Alarm Clock
･
Certificate Download
･
i-
α
ppli Auto Start
･
i-
α
ppli DX
･
Flash movie which uses the date and time setting
･
Software Update
･
Update Definition
･
SSL communication (authentication)
･
Scheduler (including data transfer and display of schedule data)
･
Machi-chara
･
Downloading and playing i-motion with replay restrictions set
･
Random Display Image
･
Downloading and playing Chaku-Uta Full
®
for which replay restrictions are set for copyright protection
Default Auto time adjust: ON Offset:
+,
00h00m
Auto time adjust
：
Set whether to automatically correct the time.
Offset
： Specify the amount of time advance (+) or delay (-) so that your terminal's clock
advances from or delays to the time obtained for a given length of time.
Date, Time
：
Enter the date and time.
･
The date can be set from January 1, 2000 to December 31, 2050.
When the automatic time correction is set
･
When you set
Auto time adjust
to
ON
,
Offset
can be set.
To enter the date and time manually, set
Auto time adjust
to
OFF
.
Next
▲