background image

4

Installation

VOPEX-C5SVA-x and VOPEX-C5SV-x

Note: VOPEX-C5SV-x  S-Video Only Splitter/Extender does not have audio support.    If the audio
support is not present, please disregard all audio references.

1.  Make connections between the VOPEX-C5SVA-x and the audio and video source(s). (See Fig. 1.)

a)  Connect a 4-pin miniDIN cable end of a SVEXT-6-MM to the VGA connector on the back of the

                    video source.

b)  Connect the other 4-pin miniDIN cable end of the SVEXT-6-MM cable to the 4-pin miniDIN

                    female connector marked "S-Vin" on the VOPEX-C5SVA-x.

c)  Connect one 3.5mm stereo plug end of the SA-6-MM cable into the 3.5mm female audio

                    connector marked "line out", "spkr", or "headphones" on the audio source.

Notes:
                   If all 3 connectors are available, use the connector marked "line out".

           The "line out" connector is typically lime green and may be marked with this symbol

           The "spkr" connector is typically orange, and may be marked with this symbol

           The "headphones" connector may be marked with this symbol

d)  Connect the other 3.5mm stereo plug end of the SA-6-MM cable into the 3.5mm female stereo

                   audio connector marked "Line In" on the VOPEX-C5SVA-x.

                                                      Figure 1- Connecting a VOPEX-C5SVA-8 to a CPU

Installation

5VDC

  2A

-

+

8

7

6

5

4

3

2

1

Line

Out

Line

In

Cat5

NTI

NETWORK
TECHNOLOGIES

INCORPORATED

Tel:330-562-7070
Fax:330-562-1999

1275 Danner Dr
Aurora, OH 44202

  ww w.nti 1.com

R

 VOPEX-C5SVA-8
    (Rear View)

4 pin miniDIN Male
S-Video Connector   

3.5mm Stereo Plug

CPU

VIDEO

 CONNECTOR

AUDIO CONNECTOR

line
out

ONE WILL BE MARKED "line 

out" ,"spkr", "headphones" 

OR WITH THIS SYMBOL

SVEXT-3-MM
(supplied)

SA-3-MM
(supplied)

4-pin miniDIN Female
   S-Video Connector
              

VIDEO

 CONNECTOR

   3.5mm Female
   Stereo Audio
   Connector              

S-Vin

S-Vout

4-pin miniDIN Female
   S-Video Connector
              

4 pin miniDIN Male
S-Video Connector   

Содержание XTENDEX VOPEX-C5SV-x















Отзывы: