NTI XTENDEX ST-C6USBH-HDBT Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 20

NTI XTENDEX ST-C6USBH-HDBT Скачать руководство пользователя страница 8

NTI XTENDEX 328 Foot HDMI USB KVM Extender over HDBaseT

5

INSTALLATION

Installing The Local Unit

1.

Connect an HD-3-MM (supplied) or

DVI-HD-xx-MM

cable (page 2) between the CPU and the "HDMI In" connector on the Local

Unit.

2.

Connect a USB2-AB-1M cable (supplied) between a USB Type A port on a CPU and the “USB to CPU” USB Type B port on

the Local Unit.

3.

If the monitor has serial touchscreen support, connect the DB9F to RJ45 adapter to the CPU and a CATx patch cable between

the adapter and the “RS232” port on the Local Unit.

Figure 1- Connect the XTENDEX Local Unit to the computer

100BaseT Support Option

If the 100BaseT support option is present (ST-C6USBHE-HDBT only), the “Ethernet Port” can be used to extend a Local or Wide
Area Network (LAN/WAN) connection. The Local or Remote unit can be used to connect a modem, router or switch or a network
device (PC, printer, hub etc) If the network device is connected at the Local Unit, then the LAN/WAN connection must be at the
Remote Unit, and visa versa. .

«
...
6
7
8
9
10
...
»

Содержание XTENDEX ST-C6USBH-HDBT





















Отзывы:

Нет отзывов