NTI XTENDEX 328 Foot HDMI USB KVM Extender over HDBaseT
7
Connect the CATx Cables
Connect the CATx cable between the “CATx” ports on the Local and Remote Unit. (See Figure 3) When properly inserted the
cable ends should snap into place.
Figure 3- Connect CATx cable
WARNING: Never connect the XTENDEX to an Ethernet card, Ethernet router, hub or switch or other
Ethernet RJ45 connector of an Ethernet device. Damage to devices connected to the Ethernet may result.
Plug-in and Boot Up
1.
Plug the power cord from the monitor into the power outlet.
2.
Connect an AC adapter power connector to the 24VDC port on
either
the Remote Unit or the Local Unit. Plug the AC
adapter into a power outlet. The green LED on the RJ45 connector of both the Remote and Local Units should illuminate,
indicating that a proper power connection has been made to them. (See Figure 4) The yellow LED will illuminate indicating
communication between the Local and Remote units.
3.
Turn ON the CPU and monitor. The CPU and monitor should each react as if directly connected to each other.
Figure 4- Connect the AC adapter to either the Remote Unit or the Local Unit
The AC adapter can be
connected to either the
Local Unit OR the
Remote Unit to make the
XTENDEX function
!