NTI VEEMUX VIDEO MATRIX SWITCH
20
Terminate telnet session
Command:
Byte 1
Byte 2
Byte 3
‘X’
(0x58)
‘X’
(0x58)
<CR>
(0x0D)
Response:
Byte 1
Byte 2
‘
∗
’
(0x2A)
<CR>
(0x0D)
The unit will respond with
‘
*
’
<CR> and close the connection, terminating the telnet session. The unit is then available for future
connections.
It is recommended that the
XX
command is used as it will close the Telnet connection with the server immediately. If the
XX
command is not used when the client exits, the server will not close the connection until it times out
from inactivity (10 seconds
)
.
The recommended sequence is
:
1) Open connection
2) Send a command
3) Close the connection with
XX
