NTI VEEMUX VIDEO MATRIX SWITCH
6
Connect RS232
RS232 control can be achieved using a separate user terminal or CPU with a terminal program. To make a terminal connection, a
DB9M-to-RJ45F adapter and 5 foot CAT5 patch cable have been supplied if needed.
Figure 5- Connect user terminal for RS232 control
Connect to the Ethernet
If the Telnet Interface (page 16) or Web Interface (page 21) will be used, an Ethernet connection to the Local Area Network (LAN)
must be made using CAT 5 cable with RJ45 connectors. Wiring between the connectors should be straight through (pin 1 to pin
1, pin 2 to pin 2, etc.) Connect a CAT 5 cable between the connector label "ETHERNET" and the LAN (see Fig. 4).
Figure 6- Connect the LAN to the VEEMUX
