manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Инструкция по установке и эксплуатации

Поделиться
Скачать
NTI ENVIROMUX-MINI-LXO Скачать руководство пользователя страница 64

NTI 

Mini Server Environment Monitoring System 

 

57

 

The Data and/or Event log can be set to send alerts to users via email, syslog, and/or SNMP traps once it has reached 90% of 
capacity, allowing them time to react.  

The Data log can also be set to send log entries via email, syslog, or SNMP traps to users in addition to the entries it records 
internally.   Enable Remote Logging for email, syslog, of SNMP as desired.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                               Figure 58- Log Settings page 

 

Log to USB Flash Settings 

 

Event and Data log messages are automatically sent to users as configured above in addition to being recorded in the logs.   The 
logs can also be downloaded as a tab-delimited plain text file.  If a USB flash drive is present, logs will also be recorded on the 
flash drive to make them portable provided the feature is enabled. 

The number of logs that can be recorded depends on the capacity of the flash drive installed. To begin recording to the flash drive,  
place a checkmark in the “Enable Log to Flash drive” box.     Be sure to remove the checkmark before removing the flash drive 
from the ENVIROMUX or the data on the drive may be lost.   

 

 

Apply a checkmark in this box 
to enable the recording of logs 
to the flash drive. 

Note: Be sure to remove the 
checkmark before removing a 
flash drive from the 
ENVIROMUX.  

Otherwise data on the drive 
may be lost.  

Содержание ENVIROMUX-MINI-LXO




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды