manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Инструкция по установке и эксплуатации

Поделиться
Скачать
NTI ENVIROMUX-MINI-LXO Скачать руководство пользователя страница 37

NTI 

Mini Server Environment Monitoring System 

 

30

 

 

 

 

 

 

 

 

                                                Figure 28- Output Relay Contact State 

 

 

To change settings for the output relay and whether or not a state change should generate an alert message, click the “Configure” 
button.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                             Figure 29- Configure Output Relay 

 

From the configuration page, the user can apply a description of the relay that will be used on the summary page and in any alert 
messages sent, if so configured.     

 

To have messages sent to specific members, select the monitoring group the relay will belong to.  

 

Choose the Normal Status for the relay, between Inactive or Active.    When the status changes from what is defined as “normal”, 
an alert will be sent if so configured.   

 

When the relay is an alert state,  the ENVIROMUX can be configured to send an email, syslog and SMS alerts, as well as an 
SNMP trap to the users subscribing to alerts in the selected group.       Place a checkmark in the box for those features you wish 
to enable.   

 

If email alerts is enabled, enter an e-mail subject line that will get the attention of the recipient(s).  

 

 

 

 

 

Note:

 A recent design improvement 

resulted in a change to the pinout of 
the output relay in the ENVIROMUX-
MINI-LXO.   Please be aware of the 
change and note which version yours 
is.   The previous version is shown 
below.   

Содержание ENVIROMUX-MINI-LXO




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды