manualshive.com logo in svg

NTEK doortalk, Руководство по эксплуатации продукта, Страница: 42 / 71

Поделиться
Скачать
NTEK doortalk Скачать руководство пользователя страница 42

41

STEP 5.17

Tap 

OK.

STEP 5.16

Tap the

 Save

 button. 

Figure 5.16.1

Note:

A pop-up message will appear saying that 

the Client device is now allowed to contact 

DoorTalk.

Note:

A Pop up message will appear saying “

Inbound 

Allowed

”

 

list is successfully send to server”

a. Red (Client device is disconnected from the SIP Server due to network error or 

incorrect SIP Account details)

 

Make sure that (1) your mobile device is connected to the WiFi network and (2) you 

entered the correct SIP Account details in 

Step 5.4.

 

b. Gray (Client device is on standby and is trying to connect to the SIP Server) Wait for 

your mobile device to connect to the SIP Server.

 

c. Green (Client device was successfully registered to the SIP Server and is ready to 

call and receive call from the DoorTalk device) 

Step 5 Confirmation:

 When done, you will see a small sphere (dot)       on your 

mobile status bar at the upper left corner of the screen. The connection status of the 

Client device to the SIP Server is indicated by the following colors:

Содержание doortalk








































































Отзывы:

Нет отзывов