Fig 1
Fig 2
Fig 3
Prior to Instalation:
Remove the Negative Battery Cable.
1 Protect the Fender before starting.
2 Note the Battery Cable position, as
it will be reinstalled in the same
position.
Do not touch the positive
battery terminal.
Vehicle Disassembly
1. Open Hood using interior hood
release. Remove three 10mm
bolts from hood vent. (Figure 1)
Vehicle Disassembly
2. Remove 3 pop clips. (Using pliers
make sure you squeeze side of pop
clips.) (Figure 2)
3 Remove hood vent by pulling up and
outwards releasing hood vent.
(Figure 3.)
