IPCAM User Manual
19
4.43 For Administrator
When you login as administrator, you can set all parameters. Please click “For Administrator” and enter into
setting interface .
Picture 24
Alias Settings:
You can Input the new name as you like.
Data &Time Settings:
Data &Time Settings page.
Users Settings:
Eight accounts are acceptable for this system. Here the eight users can configure their
user names and password as Administrator, Operator or Visitor.
Visitor:
In this mode, you can only view.
Operator:
You can control the direction of IP Camera and set some parameter.
Administrator:
You can setup the advanced configurations of the IP Camera.
UpnP Settings:
If you access IP Camera, to be make sure
UpnP Status
is Succeed.
Upgrade Device Firmware:
Upgrade Device Firmware and device embeded web UI software in this
page.
Restore Factory Settings:
Restore factory settings of the device.
Reboot Device:
Reboot the device.
Back:
Back to Monitoring Mode.
View Device ID
、
Device Firmware
Version and Device Embedded
Web UI Version
Check Device all kinds of
status
Carry
on
Settings
and
operation function
