IPCAM User Manual
13
IP address: Fill in the IP address assigned and make sure it is in the same subnet as the
Subnet Mask: The default subnet mask of the equipment is: 255.255.255.0
Gateway: Make sure it is in the same subnet with PC IP address. Default Gateway
address is 192.168.1.1
DNS:Server: IP address of IPS network provider. ( It also can view from network card local area connection
status). As blows picture.
Picture 15
Http Port
: LAN port assigned for the equipment, usually 80
User & Password
: Default administrator username/password: admin/No password
Enable Using DHCP
：
the system will assign a reasonable IP address for your equipment
only if your gateway supports DHCP (It is the case with most gateways).
DHCP checkbox: if checked, the device will obtain IP from DHCP server (To be make
sure the Router which the device connect with has DHCP function).
NOTE
: when the prompt ”subnet doesn
‟
t match, double click to change!”, please set the
IP Camera IP address once again.
Upgrade Firmware
Enter the correct User and Password to upgrade system Firmware and Web UI. (User should have administering
authority.
Picture 16
This is the server provide the
service of DNS
