TROUBLE SHOOTING
PROBLEM CAUSE
SOLUTION
Machine
runs but
does not
spray.
Pump is not primed.
Activate the shut-off handle until liquid sprays out.
Release handle and pump will shut off.
Machine will
not start.
Battery is not installed properly.
Check the battery installation.
Battery is not charged.
Check the battery charging requirements.
Battery will
not charge.
Battery is not properly inserted into the charger
Insert the battery properly into the charger until the
green LED lights up.
Charger is not plugged in.
Plug the charger into a working power outlet. Refer to
Battery Charging section for more details.
The surrounding air temperature is too hot or too cold.
Move the charger and battery to a place where the
ambient temperature is in the range of 40°F to 105°F
(4.5°C to 40.5°C).
Machine
shuts off
abruptly.
Battery has reached its maximum thermal limit.
Allow the battery to cool down.
Battery charge is depleted. (To maximize the life of the
battery it is designed to shutoff abruptly when the charge is
depleted.)
Place the battery on charge and allow the charge to
complete.
Shut-off
leaks.
The connection(s) is loose.
Tighten (all) connections.
Shut-off is worn or damaged.
Repair or replace the shut-off valve.
Wand
assembly
leaks.
Connection(s) is loose.
Tighten connection(s).
O-ring and/or gasket is worn or damaged.
Replace the O-ring and/or gasket.
Nozzle
assembly
leaks.
Connection(s) is loose.
Tighten connection(s).
O-ring and/or gasket is worn or damaged.
Replace the O-ring and/or gasket.
Leak
between the
pump
assembly
and the
solution
tank.
Pump clamp is loose
Tighten the pump clamp.
O-ring is worn or damaged.
Replace the pressure chamber O-ring.
Hose is
leaking at
the solution
tank outlet.
Hose clamp is loose.
Tighten the hose clamp.
Hose is
leaking at
the shut-off.
Connection is loose.
Tighten the retaining nut.
O-ring and/or gasket is worn or damaged.
Replace the O-ring and/or gasket.
NOTE: If any problems remain after taking the above steps, contact your local authorized distributor / service station for further
evaluation and repair.
