NSS Enterprises CHAMP 3529 RB Скачать руководство пользователя страница 1

OPERATION MANUAL 

CHAMP 3529 RB

 

  IMPORTANT SAFETY INSTRUCTIONS 

 

WARNING: 

 Failure to observe these instructions can cause 

personal injury to machine operator or bystanders. 

 

WARNING: 

Fire or explosion hazard. 

NEVER 

operate this machine in an     

explosive atmosphere (grain dust, 
flammable liquids or fumes, etc.). 

WARNING:

 

Fire or explosion hazard. 

 

NEVER

 attempt to pick up flammable 

or combustible materials or use such 
materials in tanks.

INTENDED USE 

This machine is intended for commercial use, 
scrubbing floors in an indoor environment.  NSS does 
not recommend using these machines for any other 
purpose.  

 

FOR SAFETY 

• 

ALWAYS 

read and understand all instructions 

before operating or servicing machine. 

• 

ALWAYS 

use this machine 

ONLY 

as described in 

this manual. 

• 

NEVER 

attempt to operate this machine unless you 

have been trained in its operation. 

• 

NEVER 

allow an untrained person to operate this 

machine. 

• 

NEVER 

attempt to operate this machine if it is not 

working properly or has been damaged in any 
manner. 

• 

NEVER 

disconnect or modify any switches or 

safety devices (circuit breaker). 

• 

NEVER 

drop or insert any object into any machine 

opening. 

• 

NEVER

 operate this machine with any air opening 

blocked.  Keep all air openings free of dust, lint, 
hair, etc. 

• 

NEVER 

pick up anything that is burning or 

smoking, such as cigarettes, matches or hot ashes. 

• 

NEVER

 spray this machine with water or any 

liquids. 

• 

NEVER

 allow the vacuum motor or battery 

charging plug to get wet or a short may occur. 

• 

NEVER

 operate this machine when the battery 

charger is plugged in. 

• 

NEVER

 operate this machine with the side skirt 

removed. 

• 

NEVER

 allow this machine to be used as a toy.  

Close attention is necessary when used by or near 
children. 

• 

ALWAYS 

wear clean tennis shoes or “non-slip” 

shoes. Leather soled shoes will be extremely 
slippery when wet. 

• 

ALWAYS 

keep face, fingers, hair or any other body 

part or loose clothing away from any machine 
opening or moving part (revolving brush, pad 
driver, or vacuum motor).

 

• 

ALWAYS

 turn the machine off when attaching 

pads or brushes.

 

• 

ALWAYS

 remove keys when this machine is left 

unattended.

 

• 

NEVER

 turn on machine unless sitting in the 

operators seat.

 

• 

NEVER

 climb on machine when it is turned on.

 

• 

NEVER

 use machine to transport passengers other 

than the operator.

 

• 

ALWAYS

 be sure that the ramp is secured to the 

vehicle before attempting to load / unload. 

• 

ALWAYS 

use extreme caution when operating the 

machine on a ramp or loading / unloading this 
machine into or out of a truck / trailer.  Use 
extreme caution if the ramp is wet, oily, or covered 
with cleaning chemicals. 

• 

NEVER 

stop or turn the machine on a ramp or 

incline. 

• 

NEVER 

attempt to climb a grade or operate this 

machine on a ramp or incline of more than 8 
degrees. 

• 

NEVER 

park or store the machine near a dock, on 

ramps, near a furnace, boiler, open flame, or other 
high heat source.

 

• 

NEVER 

allow this machine to freeze.

 

• 

NEVER 

expose the machine to rain, snow, or 

extreme temperatures.

 

• 

NEVER

 store any items on the machine.

 

• 

ALWAYS

 store this machine indoors in a dry, cool 

area.

 
ALL REPAIR SERVICE MUST BE PERFORMED BY AN NSS AUTHORIZED DISTRIBUTOR / 
SERVICE STATION USING ONLY NSS ORIGINAL EQUIPMENT PARTS. 

 

                                  SAVE THESE INSTRUCTIONS

Содержание CHAMP 3529 RB













Отзывы: