8
ENGLISH
GERMAN FRENCH SP
ANISH IT
ALIAN
9
(2) Removing
Push the push button with a thumb, and the bur/drill is removed. (Fig. 5)
Fig. 5
CAUTION
· Depress the head cap button until it is almost parallel to the head cap.
· If removing the bur becomes difficult, depress the Push-button, grip the bur with fine pliers and gently remove the bur. This
case may be prevented if you often change the position of the bur in the chuck.
X-SG20L/SG20 has 3 irrigation methods are available; External, Internal or both of them,
depending on tool and operation procedure. For X-SG25L, X-SG93L/X-SG93, it can connect
the Irrigation Tube to the External Spray Nozzle firmly.
(1) External Spray Nozzle
Connect the Irrigation Tube to the External Spray Nozzle firmly. (Fig.6)
(2) Internal Spray Nozzle (Fig.7)
Only a drill with internal irrigation is used.
1) Set the nozzle holder.
2) Insert Irrigation Tube in Internal Spray nozzle.
3) Put the Internal Spray Nozzle into the head firmly.
4) Put the Internal Spray Nozzle into the slot on the Nozzle Holder.
Internal Spray Nozzle: 10000324
Nozzle Holder: X-SG20L: 20000396 / SG20:20000357
Fig. 7
Fig. 6
Irrigation Tube
Nozzle Holder
Irrigation Tube
Internal Spray Nozzle
Fig. 7
3. Spray Nozzle
Fig. 6
Irrigation Tube
External
Spray
Nozzle
001
