NSK PDV30, Руководство по эксплуатации

Страница: 5 / 12

Page 5 of 12
Installation
Connection the hand-piece:
•
Push a dust bag onto the pipe socket of the handpiece-connector until it reaches the stop.
•
Afterwards, insert the handpiece-connector with the dust bag placed on it into the suction
chamber (see Illustration above - 1).
In this process, the contact pins on the handpiece-connector have to be positioned pointing
up and fit into the contact plug on the suction chamber. This is ensured by two guide pins on
the
handpiece-connector. Make sure that the handpiece-connector is in a straight position and
that it does not become jammed while you insert it.
Inserting the tool:
•
Insert the tool, e.g. a suitable grinder, into the tool holding fixture until it reaches the stop
point. Make sure that the tool is seated firmly in order to prevent any loosening of the tool
during work.
Connection the foot switch (optional):
•
Insert the plug of the foot switch into the connector on the right side of the device below the
fixing hole for the hand-piece.
Mains supply:
•
Connect the supplied power cable with the power inlet on the right side of the device.
Attention! Check the voltage (V) specified on the label before connecting the device to the
supply voltage.
•
Plug the power cord into a wall outlet with adequate protection contact.
The device is now ready for operation.
Warranty
The term of the warranty for Podiavac amounts to 1 year or a limit of 500 hours of operation, except
wearing parts such as bearings, carbon brushes, dust bag and seals.
The warranty extended for a period of another 500 operating hours up to a maximum of 1 year,
if the recommended maintenance of the device was done in time.
In case of improper use or modifications, repair activities by unauthorised staff as well as improper
handling any warranty and liability on the part of the manufacturer ceases to apply.
The device has to be returned to the supplier in its original packaging.
Retain the original packaging for such transport.
Please note: Please consider the legal provisions regarding disposal of the packaging, accessories or,
at a later date, of the device itself.