
2
CAUTIONS FOR HANDLING AND OPERATION
CONNECT ONLY NLX(nano) / NBX MOTOR. DO NOT CONNECT OTHER MOTOR.
Ř
Read these safety cautions thoroughly before use and operate the product properly.
Ř
These indicators will show you how to operate the product safely and prevent danger to you or others. They
are classified by degree and/or severity of danger. All contents relating to safety should be observed.
Classification
Degree and severity of danger or damage
D A N G E R
Provides an instruction where death or serious injury may occur.
W A R N I N G
Provides an instruction where personal injury or physical damage may occur.
C A U T I O N
Provides an instruction where minor to medium injury or physical damage may occur.
N O T I C E
Provides an instruction that should be observed for safety reasons.
DANGER
Ř
Do not attempt to disassemble the product or tamper with the mechanism. It may cause an electric shock or
fire.
WARNING
Ř
Do not use for implant surgery.
Ř
The product is designed only for clinical dental use by qualified personnel.
CAUTION
Ř
The Multi Pad operation panel is not water proof and should not be exposed to water.
Ř
Do not use the Multi Pad as a handle when you want to move the dental unit.
Ř
Do not pull the motor cord with excessive force.
Ř
Be sure to press the buttons with a finger.
Ř
Connect this product to only NLX BF (NLX nano motor), iMD (NBX motor) and Varios 170 (OPTION).
Ř
When operating this product always consider the safety of the patient.
Ř
Prior to use, always check for vibration, noise, and overheating. If any abnormalities are detected, stop using
immediately and contact your Authorized NSK Dealer.
Ř
Should the Product function abnormally, cease operation immediately and return the Product to your
Authorized NSK Dealer for repair.
Ř
Care should be taken not to place the motor cord near a gas burner. Never attempt to repair a burned motor
cord. Always replace it with a new cord.
Ř
Do not exceed the drive motor speed recommended by the manufacturer.
Ř
In case of using a motor, ensure the Gear ratio on the display matches with the Gear ratio of the handpiece.
Confirm that rotation speed is set in stipulated range.
Ř
Do not use or leave the product in a high–temperature environment such as under strong direct sunlight, by
a fire or near stove. It may cause a malfunction for inner circuit or sudden heat generation.
Ř
Do not allow any impact on to the product. Do not drop the product.
Ř
If chemical, solvent or antiseptic solution is adhered to this product, immediately wipe it away. Discoloration
or deformation may occur if left as it is.
Ř
Multi Pad is not suitable for autoclave sterilization. Do not autoclave Multi Pad nor sterilize it in any high
temperature sterilization methods.
Ř
If the unit smokes or smells of burning, turn off the power immediately and disconnect the power plug.
Contact your Authorized NSK Dealer.