6
B
A
3 Preparation for Use
›
Place the device horizontally on a stable, non-metallic surface�
›
Ensure that the device’s ventilation slots are free at all times and that it can draw in cold air through its base�
›
Connect the mains plug to a suitable power supply�
›
The rolling bearing to be heated is placed horizontally in the centre of the IHN010 induction heater’s step-shaped support cone�
›
If you are going to operate the device in TEMP MODE, connect the temperature probe with the helix cable to the left side of
the device� Make sure the polarity of the plug is correct�
›
Use the holding magnets in the measuring head of the temperature probe as a quick and easy way of checking whether the
workpiece is made of ferritic metal (magnetic) and therefore can be heated optimally using the IHN010 induction heater�
›
The magnetic measuring head of the temperature probe is placed on the inner ring of the rolling bearing or the innermost
point of the ring� The temperature probe is only used in TEMP MODE� When heating a workpiece in TIME MODE, the probe is
not required and does not need to be connected�
4 Operation
4.1 Function of Displays
A) The main display shows the selected heating time or heating temperature:
Display
Indication
t
Time in minutes
°C
Temperature in degrees Celsuis
°F
Temperature in degrees Fahrenheit
