3
Maintain the power of NSD Swim:
Please be advised that the NSD Swim is required to recharge
every 90 days if it is used less frequent. It should be recharged every day when NSD Swim is used
frequently.
Activate connection:
First, turn on the Bluetooth through the Settings in your phone. Pull the rings at
the two ends of NSD Swim with a force larger than 2 lbs and hold the force for 3 seconds. Now NSD
Swim and the NSD Swimmer App in your smart phone should be automatically connected.
LED Indicator:
Flashing red light: Low power warning
Constant red light: Charging
Flashing green light: Connecting stand-by
Constant green light: Connected
Red light turns off: Charging finished
DURING USE
Gear Up:
1.Tie the two cords at the two ends of the NSD Swim device, the short cord is connected between
NSD Swim and somewhere by the edge of the pool on a stable fixed item while the long cord is
connected between NSD Swim and the swimmer's floating belt. There is no direction positioning
the two ends of NSD Swim. However, NSD Swim should NOT be put into water.
(Figure 2)
21*29.7cm
