24
23
When registered with an IP PBX with an incoming
voice message, the LED VMS will start flashing. To
hear
the message, press the Speaker Phone key or lift the
handset then press the VMS function key.
Hot Line Settings:
8.29. You can enable/disable and set a Hot Line
phone number in this page.
8.30. When Hot Line mode is enabled, you just pick
up the phone and the NRX EVoIP phone will call the
Hot line number immediately. The default for Hot Line
mode is disabled.
8.31. Hot-Line Mode is very convenient for IP calling
to a Public Switching Telephone Network (PSTN)
number through FXO Gateway.
Alarm Settings:
8.32. You can configure the Alarm setting on this
page.
Configuration by Web Browser
Configuration by Web Browser
Call Waiting Setting:
8.25. When call waiting is set ON, you will hear an interrupt tone over the phone to remind
that there is an incoming call from the third party.
Soft Key Setting:
8.26. You can configure the VMS key (Voice Mail) setting to work with an IP PBX on this page.
