www.nationalrailwaysupply.com
1-800-357-3572
3
38933C
Figure 4.1
Figure 4.2
Rack Mounting
The charger can be mounted to a
standard
Electronic
Industries
Association (EIA) 19” (483mm) rack
system using the fasteners provided by
the rack manufacturer. The horizontal
spacing of the vertical rows of holes is
specified by EIA-310 at 18-
5/16” (18.312)
(465.1mm). The mounting flanges are
configured for an EIA 19” (483mm) rack
for a forward mounting arrangement
(note: the width from the outer edge of
one mounting flange to the outer edge of
the other mounting flange is 19-
15/16”).
Fasteners to match the thread of the rack
should be used in all 7 rack mounting
horizontal slots on each of the 2
mounting flanges (14 rack mounting slots
total) to maximize the mounting integrity.
The fasteners should be torqued to 22
inch-pounds. The dimensions and
pattern of the mounting flange rack
mounting slots is shown in figures 4.2
and 4.3
Figure 4.3
