2
4. ASSEMBLY
Insert the front wheel assembly into the front frame
tubes and secure with the c-clips.
Insert the rear wheels into the rear frame tubes until
the button clip clicks into place.
Note:
Make sure all wheels are all set to the same
height before use.
Insert the handlebars and secure with the hand-
wheel bolts on both sides.
Fit the back rest into the frame and secure with 2 x
snap clips on both sides.
4.1 Handle Height Adjustment
Adjust the Rollator handle height so that when the
user’s arm is down to their side, the hand-grip is
at wrist height. This will ensure the arms are at an
approximate 20°-30° bend when using the Rollator.
Undo and remove the hand-wheel by turning anti-
clockwise.
Adjust the handle height to the required position,
then secure using the hand-wheel.
Repeat for the opposite handle.
Note:
Make sure both handles have been set to the
same height before use.
