NRG Systems
Spidar User Manual
Rev. 3
4 November 2020
Spidar User Manual
nrgsystems.com | Page 54
Maintain Site Vegetation
Check to see if vegetation is growing up around the Spidar or Power Supply. Cut vegetation back and
take preventative measures to keep it from interfering with the equipment.
Adjust PV Angle
If the PV panels are adjustable, change their orientation in the summer and winter to maximize PV gain.
Replace Wiper Blade
The wiper blade should be replaced preemptively to avoid it wearing down and scratching the glass. A
yearly change of the wiper is a general suggestion and therefore close attention should be paid to see if
it should be replaced more frequently.
B.
Wiper Replacement Instructions
The Spidar wiping system that consists of wiper arm and water nozzle which is used to clean the top
window. The wiping system is controlled by an algorithm based off the precipitation sensor and the
Lidar beam strength. To replace the wiper blade:
1.
Lift the wiper into the upright position.
2.
Firmly hold the wiper arm with one hand and the wiper blade with the other.
3.
Slide the wiper blade downwards to release it from the wiper arm.
4.
Place the new wiper blade under the hook and slide it upward until it clicks into place:
Содержание Spidar
Страница 1: ...November 4 2020 ...
