11
6.
Connect charger AC supply cord to electric outlet.
7.
Charge battery as outlined in
OPERATION
INSTRUCTIONS
section.
8.
When disconnecting charger, disconnect AC cord,
remove clip from vehicle chassis, and then remove clip
from battery terminal.
CHARGING A BATTERY REMOVED FROM VEHCILE
Connect and disconnect the DC output clamps only after
removing the AC plug from the electrical outlet.
Never allow the DC output clamps to touch each other.
This may cause a spark.
FOLLOW THESE STEPS WHEN BATTERY IS REMOVED
FROM VEHICLE. A SPARK NEAR BATTERY MAY CAUSE
A BATTERY EXPLOSION. TO REDUCE THE RISK OF A
SPARK NEAR BATTERY:
1.
Check polarity of battery posts. A positive (POS, P, +)
battery post usually has a larger diameter than a
negative (NEG, N, -) post.
2.
Attach at least a 60cm 6-guage (AWG) insulated battery
cable to a negative (NEG, N, -) battery post.
3.
Connect the positive (red) charger clip to the positive
(POS, P, +) post of battery.
4.
Position yourself and the free end of cable as far away
from battery as possible, and then connect the negative
(black) charger clip to the free end of cable.
