Page of 15
4
5. Battery capacity Indicator
–
Battery capacity.
Display mode
Recharge immediately
Only red LED indicator lights.
Fair
Red and yellow LED light.
Good
Red, yellow and one green LED light.
Fully charged
Red, yellow and two green LED all light.
6. Battery Indicator Button - Press to show the battery capacity
7. Jump Start Indicator -
When you connect the clamps to the battery correctly, that is red clamp to
the positive and black clamp to the negative, the Green LED lights. When you connect the clamps
to the battery in the wrong way, RED LED lights, there is an alarm sound from the buzzer, indicating
error.
8. Charging Jack and Charging indicator -you can charge the battery in the unit by inserting the AC
to DC adapter charger into this DC port. Charging indicator LED is a double-color LED. When the
battery is being charged, this LED indicator light red; when the battery is fully charged, the LED
indicator light green.
9. USB - USB ports can provide 5V / 2.1A USB charging.
10. Booster cable: Red battery clamp (positive) and Black battery clamp (negative).
Note: They should connect with vehicle when the unit is used to jump start a vehicle. Be
sure that the jumpstart switch is at off position (vertical position) and the clamps are
connected in the right way that is red to positive polarity, and black to negative polarity
before turning on the switch (horizontal position) for Jump Start.
11.AC outlet -
it is a 120V AC output port. It allows you insert the AC plug of accessory you want to
power.
12. 12-Volt DC -
it is an input or output easy-access port. You can insert the cigarette plug into it to
charge the interior battery or power 12V accessories.
Note
：
The unit contains 15A fuse for over current protection.
Note
：
It is recommended that you use the unit to power 12V accessories less than 10 Amps.
Note: It is recommended that you charge the interior battery by the AC to DC adapter charger
(provided), which has protection function. There is no protection function if you choose to
charge the battery by using the clamps or the 12V plug.
13. AC indicator
– The Green LED will turn on when AC output is working well; The Red LED will
turn on when AC output error (such as over load shut off, over temperature shut off, etc)
14. ON/OFF switch for AC and USB
– Press it to turn on the AC output and USB output.
Note: Please turn it off when you do not use AC and USB. Leaving this ON will draw the
internal battery empty.
15. Speaker
16. ON/OFF Switch for Air Compress - Turns the compressor unit on and off.
17. Air Compressor Gauges - shows the PSI (lbs/in
2
) of compressor.
18. ON/OFF switch for Jump Start - It is a manual rotary switch. When you jump start a vehicle, you
should turn off the switch(vertical position) and the vehicle engine
，
connect the unit to the
vehicle(
the clamps are connected in the right way that is red to positive polarity, and black to
negative polarity
). If there is no audible alarm and /or reverse polarity LED tune to RED, then you
can turn on the switch (horizontal position). If it is not, please reverse the connection before you turn
the switch ON.
You must pay attention to the operation process.
